ISO.2.5 Connection between V-Model, ISO 900x and AQAP




		ISO.2.5 Connection between V-Model, ISO 900x and AQAP

ISO.2.5 Zusammenhang von V-Modell, ISO 900x und AQAP

Prior to being applied, all standards (V-Model, ISO 9001, AQAP-110, AQAP-150) are made into a version.

V-Model: The Project Manual by means of tender-relevant tailoring.
ISO 9001: By introducing a QM system to the contractor, represented by the QM manual.
AQAP-150: By using a QM system.

Figure ISO.2 shows the interconnection between standards and the representation in the various instantiation levels.

Figure ISO.2: Interrelation of the Standards and Their Instantiation
Legend to Figure ISO.2 (Explanation of Arrows):

1 ISO 9000-3 deviates from the ISO 9001; however, it has another structure and is a manual for the use of the ISO 0001.

2 AQAP-150 deviates from AQAP-110, but has another structure.

3 The Project Manual is generated by project- or department-specific tailoring from the generic V-Model.

4 With regard to certification the QM system of the contractor has been generated by taking into consideration the requirements of ISO 9001.

5 The additional NATO requirements of the AQAP-110 contain the requirements of the quality assessment.

6 The QM system of the contractor guarantees that it can be reviewed. It is required in ISO 9001 (AQAP-110) and AQAP-150.

7 The Project Manual determines the relevant V-Model subset. It exists in a version relevant to the contract and is the basis for the technical tailoring the regulations of which have also been specified in the Project Manual.

8 A QM system according to ISO-9001 (and thus also AQAP-110) demands a development model, represented by the V-Model.

9 AQAP-150 can be used alone or in connection with AQAP-110 (recommended by AQAP-150 for general projects with a SW supplement) as a special software and project oriented supplements. AQAP-150 demands an effective QM system that may be project-related or part of a general QM system.

10 ISO 9001 is used for SW projects in the interpretation of the ISO 9000-3. In the case of certified corporations, it is realized with the QM system.

This page online • GDPA Online • Last Updated 03.Mar.2004 by C. Freericks

V-Model:	The Project Manual by means of tender-relevant tailoring.
ISO 9001:	By introducing a QM system to the contractor, represented by the QM manual.
AQAP-150:	By using a QM system.

1	ISO 9000-3 deviates from the ISO 9001; however, it has another structure and is a manual for the use of the ISO 0001.

2	AQAP-150 deviates from AQAP-110, but has another structure.

3	The Project Manual is generated by project- or department-specific tailoring from the generic V-Model.

4	With regard to certification the QM system of the contractor has been generated by taking into consideration the requirements of ISO 9001.

5	The additional NATO requirements of the AQAP-110 contain the requirements of the quality assessment.

6	The QM system of the contractor guarantees that it can be reviewed. It is required in ISO 9001 (AQAP-110) and AQAP-150.

7	The Project Manual determines the relevant V-Model subset. It exists in a version relevant to the contract and is the basis for the technical tailoring the regulations of which have also been specified in the Project Manual.

8	A QM system according to ISO-9001 (and thus also AQAP-110) demands a development model, represented by the V-Model.

9	AQAP-150 can be used alone or in connection with AQAP-110 (recommended by AQAP-150 for general projects with a SW supplement) as a special software and project oriented supplements. AQAP-150 demands an effective QM system that may be project-related or part of a general QM system.

10	ISO 9001 is used for SW projects in the interpretation of the ISO 9000-3. In the case of certified corporations, it is realized with the QM system.